NEO:ULTRA RECEIVER
P8-HDBT2-U-RX-S
A. IR Activity Indicator: The LED will flash when an IR signal is being received.
B. IR Flasher (TX): Can be used for bi-directional IR to send IR data back to the matrix.
C. IR Receiver (RX): Connect the IR Receiver to this port and place the IR bud on the underside of the
sink device (i.e., TV).
D. HDBaseT Input: Connect the appropriate Cat5e or higher-grade cable to each the input of the
receiver, these cables should then be connected to one of the HDBaseT outputs on the matrix. The
LEDs will illuminate to indicate a link and power is being received.
E. HDMI Output: Connect the appropriate high speed HDMI cable and connect to the sink device.
F. RS232: Connect via 3.5mm Adapter (not included) for RS232 passthrough.
G. Ethernet: Optional connections for using ethernet passthrough.
