F. RS232 Phoenix Ports: Ground = Zero volts. TX is signal coming out of matrix (from remote device)
RX is signal going into matrix (to remote device).
G. Audio Outputs: Analogue, Optical and Digital Coax options for Audio Breakouts.
H. HDBaseT Outputs: Connect the appropriate Cat5e or higher-grade cable to each output. These
cables should then be connected to a neo Receiver at each Sink device. (TV/Amplifier etc.).
I. HDMI Inputs: Connect the appropriate high speed HDMI cable to each input. These cables should
then be connected to the Source device. (Blu-ray player etc.)
J. Reset: Factory reset - please use only when instructed by our customer service team.
K. Ethernet: Connect to network - required for connection to Web Interface, Third Party Control and
Cloud Remote Monitoring Portal.
L. Audio Inputs: Optical and Digital Coax options for connecting audio only source devices.
M. HDMI IR In: Connect as required. The HDMI IR In ports are to be used to return IR back to the
matrix using an P8-IR-Optocable.
N. HDMI Outputs: Connect the appropriate high speed HDMI cable to each output. These cables
should then be directly connected to each Sink device. (TV/Amplifier etc.)
