Pulse-Eight P8-HDBT2-U-FFMJ108-S Product User Manual Download Page 25

Page: 25 / 77

Input Options

Name:

Change the name of the selected input. This will be displayed on the source list on the display

device.

Control Method:

Change the control method for the supported Set Top Box. They are:

CEC (default control)

Sky UK

TiVo/Virgin

Kodi

Dish

DirecTV

Hidden:

The toggle switch can be turned on to hide the selected input from the end user's web interface.

EDID Profile:

Drop down menu to select an alternative EDID profile for the selected device.

EDID Details:

This will bring up a page detailing the selected EDID information.

Enable IR 12V:

Enable/Disable the 12-volt IR. Disable changes to 5-volt IR mode.

Note: Ensure that after any changes you click save changes button.

Summary of Contents for P8-HDBT2-U-FFMJ108-S














































































Search results

Summary of Contents for P8-HDBT2-U-FFMJ108-S

Reviews:

Related manuals for P8-HDBT2-U-FFMJ108-S

Brands by name

Popular brands

Pulse-Eight P8-HDBT2-U-FFMJ108-S, Product User Manual

Search results

Summary of Contents for P8-HDBT2-U-FFMJ108-S

Reviews:

Related manuals for P8-HDBT2-U-FFMJ108-S

Brands by name

Popular brands