Pulsar Flow Monitor, Instruction Manual

Page: 53 / 61

Page 47
Date & Time
P931 Date
This parameter shows the current date , in the format as set by P933 ( Date
Format ) and can be reset if required.
P932 Time
This parameter shows the current time and can be reset if required, in the
format HH: MM (24-hour format). This is set initially at the factory for UK
time.
P933 Date Format
This parameter allows you to alter the format that the date is displayed to
your choice of DD: MM: YY, MM: DD: YY or YY: MM: DD. The default
is DD: MM: YY.
Daylight Saving Time
P970 DST Enable
When Enabled (set to 1) the internal clock will be automatically adjusted to
compensate for the difference between standard time and Daylight Saving
Time.
Option Description
0 = No DST is disabled
1 = Yes (Default) DST is enabled
P971 DST Difference
This parameter sets the time difference between standard time and Daylight
Saving Time. The time difference is entered in HH: MM.
Default = 01:00
P972 DST Start Time
This parameter is used to set the time of day at which Daylight Saving Time
will start, the time is entered in the format HH: MM (24-hour format).
Default = 02:00