Page
36
The
fourth parameter
and the
fifth parameter
for each relay set the
Alarm
“
ON
” and “
OFF
” points. For a
high alarm
the “
ON
” is set
higher
than
“
OFF
”. For
low alarm
then “
ON
” is set
lower than
“
OFF
”. See the
appropriate
alarm ID,
table (
P212, 222
) for further information.
When P211, P221 = 3 (Loss of Echo) or 4 (Loss of Clock)
This parameter has no function and will not be displayed.
When P211, P221 = 1 or 2
P213, P223 - Relay Setpoint 1
Determines the “ON” or “OFF” point for the alarm according to the ID
selected.
P214, P224 - Relay Setpoint 2
Determines the “ON” or “OFF” point for the alarm according to the ID
selected.
Important Information
Setpoints
are entered in values according to the
function
selected.
Flow/Velocity -
entered in Display Units.
See the appropriate
alarm function
, table (
P211, 221, 231
) for further
information.
Summary of Contents for Flow Monitor
