Pulsar Flow Monitor, Instruction Manual

Page: 19 / 61

Page 13
Keypad
Hot Keys
There are five hot keys on the keypad, which can be used to quickly access
common parameters for viewing only, while in Run Mode. Pressing the hot
key once will display the first parameter, then repeated pressing will display
the others, then the
Flow Monitor reverts to Run Mode. In program mode,
they have different functions, the functions are shown below.
Hot
Key
Run Mode Program Mode
System totaliser and resettable
totaliser Not used with Flow Monitor .
Confidence level and signal
strength. Not used with Flow Monitor .
Not used with Flow Monitor . Reset parameter to default
setting.
Instantaneous mA output. Not used with Flow Monitor .
Flow and velocity readings Not used with Flow Monitor .
Not used with Flow Monitor . Takes you to the last
parameter edited, when you
first enter program mode.
Gives details of unit type,
serial number and software
revision Enter Decimal Point