Pulsar Flow Monitor, Instruction Manual

Page: 51 / 61

Page 45
P825 Totaliser Log Time
This parameter sets the time at which the totalisers are stored in non-volatile
memories
Default = 00:00
Totalisers
P820 System Totaliser
Displays the current value of the, non-resettable totaliser. During run
mode this totaliser can be viewed via the “Totaliser” hot key. Unlike
the resettable totaliser this totaliser cannot be reset whilst in run
mode, it can however be reset whilst in program mode by accessing
P820 Totaliser
and entering
zero
.
P821 Resettable Totaliser
Displays the current value of the, resettable totaliser. This
totaliser
can be allocated to appear, during
run mode
, on the auxiliary
display line (
P815
) or alternatively via the “Totaliser” hot key.
Tot. Audit
P460 to P479 Totaliser Audits
Parameters
P460
-
P479
show the
date
and total
flow
for the last
ten
days
, the first on the list are the most recent and last ones are the
oldest. When all ten total audits are full the oldest is pushed out and
all totals increment through to allow the new days total to be
registered in the first day’s total audit parameter allocation.
P480 Clear Logs
This parameter enables
all
of the Total Audits (P460 - P479) to be
cleared to factory default values.