
EN
Figure 5.1 Replace the rubber bag
To insert the rubber bag in the cuff, first place the bag on top of the cuff so that the rubber tubes line up
with the large opening on the long side of the cuff. Now roll the bag lengthwise and insert it into the
opening on the long side of the cuff. Hold the tubes and the cuff and shake the cuff until the bag is in
position. Thread the rubber tubes from inside the cuff, and out through the small hole under the
internal flap.
Disposable Blood Pressure Cuffs
Disposable cuff is intended for one-patient use only. Do not use the same cuff on any other patient. No
disinfection or high-pressure steam sterilizing to the disposable cuff. Disposable cuff can be cleaned
using soap solution to prevent infection.
Note
Considering environmental protection, the disposable blood pressure cuffs must be recycled or
disposed properly.
Storage
:
Advice
Do not expose the device in direct sunlight for long time, otherwise the display screen may be
damaged.
The basic performance and safety of the device are not affected by the dust or cotton wool in home
environment, while the device shall not be placed in an environment with high temperature,
humidity, dusty or corrosive gases.
Aged cuff may result in inaccurate measurement, please replace the cuff periodically according to
the user manual.
To avoid device damage, keep the device out the reach of children and pets.
Avoid the device close to extreme high temperature such as fireplaces, otherwise the device
performance may be affected.
Do not store the device with chemical medicine or corrosive gas.
Do not place the device where there is water.
Do not place the device where with slope, vibration or impact
4.6 Transportation and Storage
The packaged device can be transported by general vehicle or according to the order contract. Do
not transport the device mixed with toxic, harmful or corrosive materials.
The device after packaged should be stored in a well ventilated room without any corrosive gas,
temperature range: -20°C~+55°C, relative humidity no more than 95%.
4.7 Key and Symbols
Signal
Description
Refer to instruction manual/booklet.
SYS
Systolic pressure
MAP
MAP pressure
DIA
Diastolic pressure
PR
Pulse rate (bpm)
ADU
Adult
PED
Pediatric
NEO
Neonatal
ABPM
Ambulatory Blood Pressure Monitor
INFO
Information