EN
If the cuff leaks, please contact our company to buy a new one.The cuff purchased separately does
not include the BP extension tube. Please give an explanation if you need to buy a BP extension tube
at the same time. If you do not want to buy a BP extension tube, please do not throw the BP
extension tube away when replacing the cuff, install it on the new cuff.
Pouch is convenient for patients to carry the monitor. It is not necessary to replace it when the
pouch has slight wear.
At the end of its service life, the product described in this manual, as well as its accessories, must be
disposed of in compliance with the guidelines regulation the disposal of such products. If you have
questions concerning disposal of the product, please contact us or its representatives.
2. Getting Started
2.1 Open the Package and Check
Open the package and take out the equipment and accessories carefully. Keep the package material for
possible future transportation or storage. Check the components according to the packing list.
Check for any mechanical damage.
Check all the cables, modules and accessories.
If there is any problem, contact the distributor immediately.
2.2 Battery Installation
The instrument will be supplied with two 'AA' alkaline batteries or high capacity. Before using the
instrument, put the battery in the battery compartment in the back of the Monitor.
①
②
③
①
Take off the battery cover in the direction of the arrow.
②
Install "AA" batteries according to
polarities.
③
S
lide to close the battery cover.
Icon
: the batteries power will exhaust, the device prompts “Low battery” at the same time. Replace
with two new batteries (the same sort) at this time. Measurements while low power may cause data
deviation and other problems.
Cautions
Turn the unit off before replacing the batteries.
Please use 2 "AA" size alkaline batteries, do not use batteries of other types.Otherwise it may cause
fire.
New and old batteries or different kind of batteries can not be used together.Otherwise it may
cause battery leakage, heat, rupture, and damage to the monitor.
"+" and "-" polarities of the batteries must match the polarities of the battery compartment as
indicated.When the battery power is exhausted, replace with 2 new batteries at the same time.
Please take out the batteries when you do not use the device for a long time (more than ten days).
Otherwise it may cause battery leakage, heat, rupture, and damage to the monitor.
If electrolyte of battery gets in your eyes, immediately rinse with plenty of clean water. Contact a
physician immediately. Otherwise it will cause blindness or other hazards.
If electrolyte of the batteries immodestly glues on the skin or the clothes, please immediately flush
with plenty of clean water. Otherwise it may hurt the skin.
Dispose of the exhausted batteries according to applicable local regulations about environment.
Otherwise it will cause environmental pollution.
The monitor is internally powered equipment, it can be connected to the public grid.
2.3 Power on the Instrument
Hold the power button
, the indicator will flash once, which shows the boot-strap is successful, then
release the button, and the system will enter the main interface.
Hold the power button
after power on, the indicator will flash once, which shows the shutdown is