manualshive.com logo in svg

Proximus Forum 5010, User Manual

Share
Download
Proximus Forum 5010 User Manual Download Page 105

Status Menus

Telephoning

103

Pick-up select.

: Accepts a call for any other telephone. To do this, enter the 

call number of the other telephone. If the other telephone is already in the call 
state (e. g. an answering machine is in announcement mode), you pick up the 
call. The subscriber for whom you picked up the call must belong to a user 
group for which 

Call removal

 authorisation is activated, otherwise you will 

not be able to use the “Pick-up selective” function.

Note:

If the called subscriber is a member of a user group for which 
pick-up protection is active, “Pick-up” and “Pick-up selective” 
are not possible.

Take

: You accept a current call from a different terminal at your telephone 

and continue your call on your telephone. The prerequisite is that your 
telephone and the other terminal have the same internal call number. 

Announcement

: After entering the call number, you can initiate an 

announcement to another system telephone, or on a group of system 
telephones (see also the chapter 

Announcements (with and without 

Intercom)

 on page 126).

Intercom

: After entering the device ID, you can initiate an announcement to a 

single

 system terminal (see also the chapter 

Announcements (with and 

without Intercom)

 on page 126). The microphone is activated on the terminal 

called and the person you are calling can immediately answer your 
announcement. The “intercom” function cannot be used for announcements 
to a group of terminals. 

Charges

: For each trunk key, you can view the charges for the last call as well 

as the total charges.

Door opener

: This activates the door opener.

Suppress number

: For the following (external or internal) call, your call 

number will not be shown to the subscriber. This menu entry is dependent on 
the system settings.

Transmit number

: For the following call, your call number will be presented 

to the called subscriber. This menu entry is dependent on the system settings.

LCR off

: This switches off the LCR function.

VIP call

: Your next internal call is made as a VIP call. 

Summary of Contents for Forum 5010





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands