ProSoft Technology BM GM1K Series, User Manual

Page: 51 / 101

Wireless I/O Designer
ProSoft Technology, Inc. Page 51 of 101
January 8, 2018
8.5.3 0-10 V I/O Module
1. Name : Create a name
2. Module ID : Slave ID number
3. Select Read Interval (Outputs are based on change and not interval)
4. Analog Settings
a. Select settings for Input 1 and 2
i. Volts * 1000 (10,000)
ii. 0.0 to 10.0 Volts
b. Select settings for Output 1
i. Counts (65,535)
ii. Volts * 1000 (10,000)
iii. 0.0 to 10.0 Volts
iv. 0.0 to 100.0%
c. Select settings for Output 2
i. Counts (65,535)
ii. Volts * 1000 (10,000)
iii. 0.0 to 10.0 Volts
iv. 0.0 to100.0%
5. Map to: Integer (16-bit), Floating Point (32-bit), or both
6. Click OK when finished adding I/O module(s).