ProSoft Technology BM GM1K Series, User Manual

Page: 66 / 101

COM Port Setup and Wireless I/O Designer
Page 66 of 101 ProSoft Technology, Inc.
January 8, 2018
d. Check Output Build tab window for verification of update.
9.3 Connect to Gateway Function in Wireless I/O Designer
When a Gateway is connected to Wireless I/O Designer Software, users can also
directly access the settings stored on the device. In Wireless I/O Designer, we
call this “connecting to device.” Once connected, there are a variety of actions
that can be performed such as checking Firmware version, exporting data log,
RTU and Ethernet port settings, and changing date and time.
1. To perform this function, the Gateway must be powered and connected to
Wireless I/O Designer (Mini USB or Ethernet).
a. Connect to Device shows the current setup of Gateway only.
b. To change Gateway settings, you must access the properties by clicking
the E button or using the Edit command, then re-updating the Gateway.
2. Click on Gateway in Project Tree and Click ( Connect) button.