ProSoft Technology BM GM1K Series, User Manual

Page: 68 / 101

COM Port Setup and Wireless I/O Designer
Page 68 of 101 ProSoft Technology, Inc.
January 8, 2018
5. Config Port Tab
a. Displays how the Config port is set up for connecting to PC
9.4 Polling Modbus Registers using Wireless I/O Designer
Wireless I/O Designer Software version 1.0 and higher provides users the ability
to poll Modbus registers from a Wireless Gateway for installation verification.
This feature allows users to take poll once per command. Continuous polling is
not available.
Single, multiple, or all registers can be selected for polling.
When the Gateway’s Config port is in Modbus Slave mode, the Debug mode is
disabled and vice versa.
1. Open Wireless I/O Designer project file on your PC.
2. Connect Gateway to PC using the proper cables.
3. Click on Gateway in the Project Tree.
4. Click

( Connect to Device ) button.
5. Click on the Config Port tab.