ProSoft Technology BM GM1K Series, User Manual

Page: 69 / 101

COM Port Setup and Wireless I/O Designer
ProSoft Technology, Inc. Page 69 of 101
January 8, 2018
6. Verify the Gateway is in Modbus Slave Mode.
7. If Gateway is not in Modbus Slave Mode, Then:
a. Click Cancel to exit screen.
b. Click Gateway in the Project Tree.
c. Click E (Edit) button.
d. Click on Config Port tab.
e. Change mode to Modbus Slave.
f. Click OK.
g. Click

( Update Device ) button.
8. Double-click on Gateway in the Project Tree.
9. Click on Modbus Tab.
10. Select desired registers.
11. Right-click over the highlighted area and select Poll Modbus Register(s) .