PRONAR T185/1, User Manual, Page: 98 / 156

Rozdział 4 Terms of use
4.32
PRONAR T185/1
4.10 RULES OF THE TIRES USING
• When working on fire, secure the ma -
chine against rolling away by placing
wedges under the wheel. The wheel
can be dismantled only when the trailer
is not loaded.
• Repair work on wheels or tires should be
carried out by persons trained and au-
thorized to do so. These works should
be carried out using appropriately se-
lected tools.
• Checking the tightening of the wheel
nuts should be carried out after the first
use of the trailer, every 2-3 hours during
the first month of using the machine,
and then every 30 hours of driving.
Each time, repeat all operations if the
wheel was disassembled. Wheel nuts
should be tightened in accordance with
the recommendations contained in the
MAINTENANCE chapter.
• Regularly check and maintain proper
pressure in tires as recommended in
the instructions (especially after a long
period of non-use of the trailer).
• Tire pressure should also be checked
during all-day intensive work. It should
be taken into account that an increase
in tire temperature can increase the
pressure by up to 1 bar. With such
a rise in temperature and pressure,
reduce the load or speed.
• Never reduce pressure by venting if it
increases due to temperature.
• Valves must be secured with suitable
caps to avoid soiling.
• Do not exceed the maximum trailer
speed.
• Take a minimum of one hour break at
noon during the whole day cycle.
• Observe 30 minutes breaks for cooling
tires after driving 75 km or after 150 mi-
nutes of continuous ride depending on
what comes first.
• Avoid damaged surfaces, sudden and
variable maneuvers, and high speeds
when turning.
H.3.4.622.10.1.EN