PRONAR T185/1, User Manual, Page: 73 / 156

Rozdział 4
4.7
PRONAR T185/1
Terms of use
SIDE RUNNING SHIELDS
The design of the side ramps allows them
to be locked in the transport position and
in the raised position.
LIFTING
• Remove the cotter pin (2) securing
the underrun protection.
• Raise the guard to a suitable height
so that it can be locked - position (B).
• Secure the cover with the pin in the
hole marked with a black arrow in the
drawing - position (C).
LOWERING
• Lower the cover in the reverse order.
Remember! The cover should
be secured in the lower position
with a cotter pin.
H.3.4.622.01.1.EN
CAUTION
Side covers cannot be used as elements helping to
get on the trailer. Do not drive with the overrun guard
raised. Before driving, make sure the guards are lo-
wered and locked in the down position.
If this is not necessary, do not leave the covers in the
raised position.
C
B
A
622-H.05-1
1
1
2
2
Figure 4.5 Right running shield
(1) The rollover bar (2) cotter
(A) shield in transport position
(B) shield in the raised position
(C) hole for shield lock pin