PRONAR T185/1, User Manual, Page: 70 / 156

Rozdział 4 Terms of use
4.4
PRONAR T185/1
• Set the support foot to the desired
position.
• Secure the support foot with a bolt.
Remember! The bolt of the pin
must be between the plate and
the telescope.
• Shift the support gear to a higher
gear.
To do this, pull the crank in the
direction (B).
• Turn the crank clockwise to lower the
support foot to contact the ground.
• Shift the support gear to a lower gear.
To do this, move the crank in the
direction (A).
• Set the support at the desired height.