PRONAR T185/1, User Manual, Page: 35 / 156

Chapter 2
2.5
PRONAR T185/1
Safety of use
2.4 LOADING AND UNLOADING OF THE CONTAINER
• Loading and unloading work should
be carried out by a person expe-
rienced in this type of work.
• It is forbidden to exceed the trailer’s
maximum carrying capacity as it thre-
atens road safety and may cause
damage to the machine.
• It is forbidden to transport people and
animals both on the chassis of the
trailer and in containers. The trailer is
not intended for transporting people
and animals.
• Individual types of containers are
adapted to transport various groups
of materials, therefore the user is
required to read the container in-
struction manual and follow the re-
commendations contained therein.
• The load in the container must be ar-
ranged in such a way that it does not
endanger the stability of the trailer
and does not hinder driving.
• The arrangement of the load in the
container must not cause over-
loading of the running gear and trailer
drawbar eye.
• Loading and unloading works may
only be carried out when the trailer is
placed on level and hard ground. The
tractor and trailer must be placed for
straight-ahead driving.
• When unloading the container, it is
prohibited to control the middle frame
lock with the frame raised.
• Ensure that there are no bystanders
in the container loading/unloading
area. Before swing, ensure adequate
visibility and make sure that there are
no bystanders nearby.
• It is forbidden to start or drive with the
raised container.
• Use extreme caution when working
near power lines.
• Be careful when opening container
closures due to pressing the load
against the walls.
• Be careful when closing container
walls because of the risk of fingers
crushing.
• Tilting of the container is prohibited
during strong wind gusts.
• If the load does not fall from the
raised container, unload immediately.
Another swing over is only possible
after removing the cause of the
problem (wedging, sticking).
• It is forbidden to jerk the trailer forward
in the event that the volumetric load
or hard-pouring load has not been
unloaded.