PRONAR T185/1, User Manual, Page: 7 / 156

5
PRONAR T185/1
Introduction
CONTROL OF THE MACHINE AFTER DELIVERY
The manufacturer ensures that the ma-
chine is technically sound, has been
checked in accordance with control pro-
cedures and is put into service. However,
this does not release the user from the ob-
ligation to check the machine after delivery
and before first use. The machine is deli -
vered to the user completely assembled.
Detailed information on the transfer can
be found in the WARRANTY CARD.
CONTROL RECOMMENDATIONS
• Check completeness of machine
as ordered (standard and optional
equipment).
• Check the machine for missing parts
or damage resulting from incorrect
transport of the machine to its desti-
nation (dents, punctures, bends or
broken parts, etc.).
• Check technical condition of guards,
safety devices.
• Check the condition of the paint co-
ating, check for signs of corrosion.
• Check the condition of the tires on
the road wheels and the air pressure
in the tires.
• Check the correct tightening of the
road wheels.
• Check the technical condition of the
drawbar eye and its fastening.
• Check the technical condition of the
flexible hydraulic hoses.
• Check technical condition of pneu-
matic hoses.
• Make sure there are no hydraulic oil
leaks.
• Check the machine’s lighting electric
lamps.
• Check the electrical controls (panel,
harness).
• Check cylinders for hydraulic oil
leaks.
In case of any irregularities found, report
them directly to the seller to remove the
defects.
U.11.2 EN
ADVICE
The handover of the machine includes a detailed
examination and check of its operation, as well as
instruction for the buyer on the basic principles of
use. The first start takes place in the presence of the
Seller.