PRONAR T185/1, User Manual, Page: 142 / 156

Rozdział 6 Technical service
6.8
PRONAR T185/1
6.6 ADJUSTING THE DRAWBAR HITCH POSITION
Adjustment of the position of the drawbar
eye is carried out by changing the position
of the drawbar eye (2) relative to the front
plate (1) of the drawbar.
SCOPE OF ACTIONS
• Unscrew the drawbar eye from the
front plate (1) of the drawbar.
• Set the cable in the new position and
tighten it with the correct torque.
• The design of the front plate (1) allows
2 positions of the tie rod with 120mm
bolt spacing and 6 positions of the tie
rod with 110mm bolt spacing - see
illustration.
• Check correct tightening of the cable
after the first trip with a load.
J.3.4.622.06.1.EN
Correct adjustment of the drawbar eye position si-
gnificantly simplifies trailer aggregation. After adjust-
ment, the drawbar should be in a horizontal position.
Take special care during adjustment due to the si-
gnificant weight of the drawbar and the possibility of
crushing limbs.
CAUTION
110
120
110
110
110
110
110
120
1
2
3
622-J.04-1
Figure 6.7 Adjusting the position of the drawbar
eye
(1) front plate (2) cable (3) screw connection