PRONAR RC2100-2, Operator'S Manual

Page: 70 / 121

Pronar RC2100-2 SECTION 4
4.12
Loading of trailer may only take place when the machine is hitched to tractor. The load must
be arranged in such a manner that it does not overload the axle or hitch system of the tractor
and trailer.
DANGER
Do NOT exceed the trailer's maximum carrying capacity.
People or animals and loads not permitted by the Manufacturer must not be carried on
the trailer.
Loading the trailer
Tractor and trailer must be placed to drive forwards.
Immobilise tractor and trailer with parking brake.
Switch off tractor engine, secure the cab to prevent unauthorised access.
Unlock and remove the transport straps of the ramps.
Unlock the spring catches and lower the ramps to the ground (manually or
using the hydraulic system distributor – depending on trailer equipment).
Place the load on the trailer platform.
Fold the ramps.
Install transport straps and lock locking pins.
Secure the load.
Hoisting crane or overhead crane of proper lifting capacity or additional agricultural tractor
may be used for loading the trailer.
ATTENTION
Lower the ramps until they fully rest on the ground. Otherwise, when a machine is driven
onto the load platform, the trailer will have a tendency to raise the drawbar, which may
cause damage to the tractor hitch or drawbar.
Unfolded ramps must be at the same height. Do not place the ramps in such a manner
that one of the ramps is supported on an obstacle (e.g. stone, curb etc.).