PRONAR RC2100-2, Operator'S Manual

Page: 44 / 121

Pronar RC2100-2 SECTION 3
3.4
transport straps (2). Lighting elements and reflective lights are attached to the bottom side of
the ramps – rear lamp assemblies (5).
FIGURE 3.2 Front view
(1) floor planks, (2) fixing lugs, (3) front wall, (4) spare wheel, (5) under-run protective device,
(6) side holder wall
The load platform floor is made of profiled planks (1) - figure (3.2) with a thickness of 45 mm.
Load placed on the platform is secured with belts, ropes or chains, which are attached to
fixing lugs (2) located along the whole platform, on both sides of the trailer. The fixing lugs
are marked with information decals (8) – table (2.1). On the front side, the load platform is
limited by wall (3) to which spare wheels (4) (optional equipment) are attached.
On the left side of the frame, under-run protective device (5) and floor surface, there is holder
(6). The holder is locked and secured with cotter pins.