PRONAR RC2100-2, Operator'S Manual

Page: 27 / 121

SECTION 2 Pronar RC2100-2
2.3
•
Before lowering the ramps, make certain that there are no bystanders or other
obstacles in the ramp lowering zone.
•
Be especially careful when lowering or raising the ramps because the ramps are
heavy and there is a risk of crushing.
2.1.2 HITCHING AND UNHITCHING FROM TRACTOR
Do NOT hitch the trailer to tractor if the tractor does not fulfil the requirements
specified by the Manufacturer (minimum tractor power demand, wrong hitch, etc.)
– see table (1.3) REQUIREMENTS FOR AGRICULTURAL TRACTOR. Before
hitching the trailer make certain that oil in external hydraulic system of tractor may
be mixed with the hydraulic oil of the trailer.
•
Before hitching the trailer check that both machines are in good technical
condition.
•
While connecting the trailer to the tractor, use the appropriate hitch. After
completed hitching of the machines check the safety of the hitch Carefully read
the tractor Operator's Manual. If the tractor is equipped with an automatic hitch,
make certain that the coupling operation is completed.
•
Be especially careful when hitching the machine to the tractor.
•
When hitching, there must be nobody between the trailer and the tractor. A
person assisting in the trailer hitching should stand in such a place (beyond the
area of danger) in which he/she is continuously visible to the tractor driver.
•
Hitching and unhitching the trailer may only take place when the machine is
immobilised with the parking brake.
•
When the trailer hitching is completed, raise the support and set it to transport
position.
•
While placing the support in transport position or rest position, do not place hand
between moving elements of the support. Ensure that the support is properly
locked with the use of an interlock.