PRONAR RC2100-2, Operator'S Manual

Page: 69 / 121

SECTION 4 Pronar RC2100-2
4.11
Prior to moving off, release trailer's parking brake.
ATTENTION
Do NOT move off or drive with the support raised only by means of the hydraulic
cylinder. The support must be set to driving position.
Do NOT travel with the trailer if the support securing elements are damaged or lost –
safety pin (3) and R-clip (4).
Setting the support to rest position
Immobilise tractor and trailer with parking brake.
Remove cotter pin (4) of safety pin (3) – Figure (4.2).
Turn the support to position (1) – parking position.
Insert safety pin (3) to socket (A) and secure it with R-clip (4).
Set cut off valve (5) to „O” position.
Operate selective control valve in the tractor in order to lower the support foot.
Drawbar hitching eye should be slightly raised with regard to the
tractor hitch in order to facilitate unhitching the trailer.
Set valve (5) to „Z” position.
DANGER
Danger of crushing. Be especially careful when lowering the support – this refers to
bystanders or helpers.
4.5 LOADING AND UNLOADING THE TRAILER
4.5.1 STANDARD SIZE LOADS
Standard size loads are all loads permitted for transport, whose dimensions do not exceed
allowable dimensions specified by the road traffic regulations in force in the country where
the trailer is used. Load must not extend beyond the outline of the load platform.