5.6 Reasons for triggering Eco!Mode
Selecting the swimming pool to which the M-module is connected
configures the time when
[Eco!Mode] operating mode is active on
the DULCOMARIN
®
3.
1.
If you have selected a swimming pool, swipe left or right
through different windows until you come to
‘Pool settings’ .
2.
Now select
[Eco!Mode].
You can enable or disable different parameters.
[Eco!Mode] with the 2nd set of parameters can be activated
by the following activated parameters:
n
DIN standard values for the individual measuring chan‐
nels,
n
Activation contact,
n
Time.
5.7 Synchronising DXMaM settings
This menu item lets you read all parameters from the M-module to
be set. This function is beneficial if you are commissioning an
existing system with a new DULCOMARIN
®
3. This function lets
you import all the settings of the M-module into the DULCO‐
MARIN
®
3.
5.8 M-module changes in the DULCOMARIN
®
3
Every measuring channel (e.g. pH or ORP) can be given an indi‐
vidually delayed starting time of the controller in the DULCO‐
MARIN
®
3. This means that each measuring channel can start indi‐
vidually delayed with the controller. The set time is the same on all
measuring channels by the use of an M-module (DXMaM). Each
measuring channel is therefore given the same delay time. Note
this during commissioning.
Configuring the M-module (DXMaM, measurement module)
18
Summary of Contents for DULCOMARIN 3 Compact
Page 27: ...27 ...