4.4 Overview of all connected CAN modules
Connectivity
Node-ID
Assignment of modules
A3193
System overview
BUS details
Send e-mail enquiry
Send e-mail enquiry
Serial number
Software version
Node-ID
Serial number
Software version
14
20002475121
3009
11
200
3017
Fig. 6: Overview of all connected CAN modules
1.
An overview of the CAN modules in the assigned swimming
pool can be found in the
‘BUS details’ interface. If you have
selected a swimming pool, swipe left or right to move to the
‘BUS details’ menu.
2.
You can select every CAN module and configure the param‐
eters of the CAN module here.
4.5 Final configuration
1.
You now need to configure the M-/ A-/P-modules to complete
the commissioning of the system. If you replace a DULCO‐
MARIN
®
II with a DULCOMARIN
®
3, then the DULCO‐
MARIN
®
3 can read and process the configurations of the
modules from the respective modules.
2.
The
‘BUS details’ interface provides an overview of the CAN
modules in the assigned swimming pool. If you have selected
a swimming pool, swipe left or right to move to the
‘BUS
details’ menu.
3.
Select a module, for instance an M-module. Then press
‘DXMaM (M-module) Reload’ (see chapter 7).
ð
After the module has loaded, you can verify the settings
and configure all other modules (M-/A-/P-modules) in the
same way.
Commissioning the DXMaX module on the DULCOMARIN
®
3
14
Summary of Contents for DULCOMARIN 3 Compact
Page 27: ...27 ...
