6.5 A-module diagnostic
A-module (DXMaA) diagnostics
A3196
Factory settings
Pool description 1
Module is reset to factory settings!
R1:
Pump for pH raising agent
Update in 0 seconds
0.0 mA
14.40 mA
13.58 mA
23.00 mA
180
strokes/min
180
strokes/min
180
strokes/min
maximum frequency
Functions
Iout4:
Measured value of combined chlorine mA output
Iout3:
Measured value of chlorine mA output
Iout2:
Measured value of ORP mA output
Iout1:
Measured value of pH mA output
K3:
NO
Error at the pump
K2:
NO
Error at the pump
K1:
NO
Error at the pump
R3:
Pump for flocculant
R2:
Pump for chlorine raising agent
Fig. 11: A-module diagnostic
The
‘Diagnostics’ menu summarises on a page an overview of the
settings of the A-module and the current switching position and/or
the current parameters set.
6.6 Factory setting of the A-module
You also have the option of resetting the A-module to factory set‐
tings.
Press
‘Factory settings’ , as shown in Fig. 11, and follow the
instructions.
ð
You need to re-parametrise the module if you reset a
module to factory settings.
6.7 Synchronising DXMaA settings
This menu item allows you to read all parameters from the A-
module to be set. This function is beneficial if you are commis‐
sioning an existing system with a new DULCOMARIN
®
3. This
function lets you import all the settings of the A-module into the
DULCOMARIN
®
3.
Configuring the A-module (DXMaA) (actuator module)
22
Summary of Contents for DULCOMARIN 3 Compact
Page 27: ...27 ...
