NOTE
:
Before pass/fail testing can begin, limit lines for the upper and/or lower
limits must first be saved and activated.
Press
X
Pass/Fail
to turn the testing on or off.
The test result is updated in real-time at the bottom of the display.
Pass
:
Fail
:
NOTE
:
At least one limit line (high or low) must be turned on to enable
testing.
If only high limit line is on, each trace point has to be lower than the
high limit line to get a PASS judgment, otherwise get the judgment will
be FAIL.
Conversely, if only low limit line is on then each trace point has to be
higher than the low limit line to get a PASS, otherwise get the test will
be judged a FAIL.
3-44
July 2018
