Promax AE-366B User Manual Download Page 32

Page: 32 / 86

3.5

Marker

A Marker shows the frequency and amplitude of a waveform point. The

AE-366B

can activate up to 5 markers or marker pairs simultaneously.

The marker table and peak table functions help editing and viewing multiple
markers in a single display.

The delta marker function allows you to see the frequency and amplitude
differences between reference markers.

The

AE-366B

can automatically move a marker to various locations including the

peak signal, center frequency, and start/stop frequency. Other marker operations
regarding signal peaks are available in the Peak Search function.

  Activating a Marker
  Activate a Delta Marker
  Move Marker Manually
  Move Marker to Preset Locations
  Move Marker to Trace
  Turn All Markers On or Off
  Show Markers in Table
Peak

Move Marker to Peak
Move Marker and Peak to Center
Search

for

Peaks

Peak

Table

3-24

July 2018

Summary of Contents for AE-366B























































































Search results

Summary of Contents for AE-366B

Reviews:

Related manuals for AE-366B

Brands by name

Popular brands

Promax AE-366B, User Manual

Search results

Summary of Contents for AE-366B

Reviews:

Related manuals for AE-366B

Brands by name

Popular brands