July 2018
3-23
3.4.2
Limiting the Autoset Vertical Search Range
You can set the amplitude floor so that the signals lower than the setting will be
ignored by the Autoset search.
Press
X
Amp.Floor
and switch the range from Auto to
Man.
Enter the amplitude limit with the number pad and Enter key.
Range
:
−
50 to + 20 dBm.
3.4.3
Limiting the Autoset Horizontal Search Range
You can change the frequency span limit in the display to get a better view of the
Autoset result. By default, the frequency span after Autoset is set at 3 MHz.
Press
X
Span
and switch the range from Auto to Man.
Enter the span frequency for the Autoset search.
Manual Range
: Full
amplitude
range.
