Half-Lower
:
Half-Lower will put the spectrum analyzer into split screen mode. It will
make the bottom sweep the active sweep and pause the top sweep. When
Half-Lower is on, only the lower sweep settings can be edited.
Alternate Sweep
:
This setting will alternate the sweep between the bottom and top
spectrums. If alternate sweep is turned on, only the upper sweep
parameters can be edited.
►
Operation
Press
>
Half-Upper
or
Half-Lower
or
Alternate
Sweep
to enable the split spectrum view.
Turning Half – Upper on will automatically turn Half-Lower off.
Turning Half – Lower on will automatically turn Half-Upper off.
If Alternate Sweep is turned on, each sweep will alternate, but
only the upper sweep parameters can be edited.
To return to a full - screen, single spectrum display, press
Full Display
.
NOTE
:
After exiting the split spectrum view, the analyzer will use the settings
from the active window. The settings for the inactive screen will be
retained for the next time that split spectrum view is used.
If the spectrum analyzer was in the Alternate mode, then the upper
sweep settings will be returned.
3-52
July 2018
