33501 Series Operation Manual 3-11
Fig 3-3 Remote sense connection on front panel(when current
≦
60A)
Fig 3-4 Remote sense connection on rear panel(When current >60A)
3.1.24 I-monitor
The I-monitor analog signal is proportional to the load current flow through the
electronic load module.
This is virtual isolated to the Load input, it provides the load current waveform
output to an oscilloscope to evaluate the voltage and current waveform of a power
supply under test.
Note : Don ‘t use Imonitor with different channel to avoid common ground problem.
Please refer chapter 1, Table 1-1 for voltage /current relationship of each 33501
series module.
