33501 Series Operation Manual 2-9
S3+S4
Show n1-n9
Start Mode
1.Press S3+S4 key, and S3 and S4 LED are ON
2.Show AUTO SEQ. No.1-No.9,
Press Up/Down key to set n1-n9
Initial = n1
Press Start key
3.Press Start key to Start Mode
Testing
1.To recall correspond memory which had been stored in n1-n9 memory
Show Memery
bank and State
EXI
Yes
End?
No
Sp = Sp+1
No
PASS/FAIL
Show GO
Show NG
PASS
FAI
1
2
3
Yes
4.1 If no than Step + 1, continue another step.
4.2 If "Yes", than if all the test in all module is pass,
Show GO.
4.3 If "Yes", than if there is at least one failure during the test,
Show NG.
4
4.2
4.3
4.1
4.If test is GO, than step is last?
3.Press Exit key to quit the AUTU SEQ mode
2.Check the GO/NG indicator
Press Exit key
Any key
Fig 2-10 TEST MODE OPERATION FLOW-CHA
