Usage instructions BUDDY 4all & classic
25
Figure 43: Clothing guard mount
Figure 44: M5 fixing screws and slots in the side
section mounts
Now the front and back side section mounts
can be positioned along the slots in the cloth-
ing protection guard and the side section
mounts. Ensure that the side section mounts
can be smoothly inserted back onto the back
jointed shaft and into the side section mounts.
Finally the clothing guard mounts are posi-
tioned accordingly and the M5 fixing screws
(AF 3 mm) are screwed back into the clothing
guard mounts with 6 Nm.
Figure 45: Slots of the clothing guard
20.2.4 Adjusting the force required for
removing and installing
The following instructions are intended for
and may only be carried out by a rehabilitation
specialist dealer or PRO ACTIV
To make the removal and installation of the
clothing guard easier or more difficult, adjust-
ments can be made on the "bolted side section
mount". In doing so, there are three options for
adjusting the intensity of the pulling or pressing
force required for removing and installing the
clothing guard.
Figure 46: M6 pressure piece screwed into "basic
body of side section mount"
If the front side section mount has too much or
too little play in the "side section mount, bolt-
ed", it can be adjusted using the
M6 pressure
piece
in the basic body of the side section
mount. To reduce the play in the front side
section mount, screw the M6 pressure piece
(AF 3 mm) in a little more by turning it clock-
wise. To increase the play, turn anti-clockwise
to unscrew the M6 pressure piece (AF 3 mm)
slightly.
Figure 47: Back side of the sprung pressure piece
with slot
Clothing guard
mount
M5 fixing screws
Slots of the side
section mount
Slots of the clothing guard
Side section mount basic body
M6 pressure piece
Side section
mount, bolted
