Usage instructions BUDDY 4all & classic
38
Figure 88: M6 fixing screw with washer and slot in
footrest support tube for adjusting the lower leg
length
Once the position has been set, fix the footrest
support tubes by tightening the M6 fixing
screws (AF 4 mm) with washers to 11 Nm on
both sides.
Additional adjustment options for lower leg
length with the footrest at a greater dis-
tance:
For lower leg lengths of less than
29 cm, the footbar is moved upwards with the
help of corresponding footbar holders, which
does not restrict the adjustment options. The
lower leg length can also be changed by in-
stalling spacers of different lengths. In addition,
in this case the footplate support can be shifted
lengthwise.
Figure 89: Footrest at a greater distance
23.3 Footrest folding up to one side
Figure 90: Footrest folding up to one side, standard
position
For
footrest folding up to one side
, lift the
footplate support up in the direction of travel on
the left side.
Figure 91: For folding up to one side, lift the footrest
up in the direction of travel on the left side (product
view from the front)
Figure 92: Footplate support raised from the bracket
(product view from the front)
M6 fixing screw
with washer
Slots in the
support tube
Footplate support
Bracket with cylinder pin
Footplate
support
Footbar holder
