Usage instructions BUDDY 4all & classic
26
Figure 48: Front side of the sprung pressure piece
with ball
If the effort required for removing or installing
the clothing guard is still to easy or difficult
after carrying out the previous adjustment,
another setting can be carried out via the
spring suspended pressure pieces. Screw in
the "
M6 sprung pressure pieces
" (AF 3 mm)
a little more (clockwise) using a slotted screw-
driver (on the back side of the basic body of
the side section mount) (Fig. 49) so that they
protrude further out of the basic body of the
side section mount (Fig. 50) to increase the
force required when removing and installing.
To reduce the force required when removing
and installing, screw out the "M6 sprung pres-
sure pieces" a little more (anti-clockwise) so
that they protrude a little less out of the basic
body of the side section mount.
Figure 49: "M6 sprung pressure pieces" screwed
into "basic body of side section mount" (view from
inner side of product)
Figure 50: Front side of the sprung pressure pieces
visible (view from top)
As a final option for adjusting the force re-
quired when removing and installing the cloth-
ing guard, slightly release the
M5 fixing
screws
(AF 4 mm) and pull the "side section
mount, bolted" along its slots a little further
away from the basic body of the side section
mount or press it a little closer towards the
basic body of the side section mount.
Figure 51: "Side section mount, bolted" with elon-
gated holes and M5 fixing screws on basic body of
side section mount (view from below)
20.2.5 Clothing guard size
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
Side section mount basic body
"M6 sprung pressure pieces" visible on
"basic body of side section mount"
"M6 sprung pressure pieces" screwed
into "basic body of side section mount"
M5 fixing screws in the
"bolted side section mount"