Chapter 5 System Setup
5-17
DMI Event Logging
Specifies the parameters related to DMI event logging. Point the cursor to the [DMI Event Logging] on the
[Advanced] screen and press the [Enter] Key, so that the following screen will be displayed.
Event log validity
Shows the status of the event log storage area. [Valid] is shown when the status is normal, and [Not valid] is
shown when the status is abnormal.
Event log capacity
Shows the status of the area to which event logs are written. [Full] is shown when the area is full, and [Space
Available] is shown when the area is not full.
View DMI event log
Point the cursor to [View DMI event log] and press the [Enter] Key to view the DMI event logs.
Event Logging
Specifies whether event logs need to be recorded. Select from [Enabled] or [Disabled]. The factory default
setting is [Enabled].
ECC Event Logging
Specifies whether the event logs related to memory ECC need to be recorded. Select from [Enabled] or
[Disabled]. The factory default setting is [Enabled].
Mark DMI events as read
Point the cursor to [Mark DMI events as read] and press the [Enter] Key to mark unread event logs as read.
