Chapter 3 Peripheral Device Installation
3-13
(4)
Secure the front face fastener to the bottom of the CD-ROM unit using the two (2) attachment screws.
The torque should be 0.5 to 0.6N•m.
(5)
Connect the CD unit to the PL unit via the connection cable, folded the cable over, along the diagonal
line. Be sure to confirm that the Cable's #1 pin mark and the connector are correctly aligned. Do not any-
thing connect to the DC INPUT Connector.
• Make sure that the cable is securely plugged into the connector before you turn
on the power switch.
• Refer to the following drawings to confirm that the connection cable is securely
attached to both connectors. Be sure to check both connectors before turning the
PL ON, since incorrect attachment of the connectors can cause equipment
damage.
1 Pin Mark
DC Input Connector
×
×
