Pro-face PL-6930-T41 User Manual Download Page 142

Page: 142 / 175

Chapter 7 PL Monitoring Features

7-17

7.4

Monitoring the PL Status from the Server

The Remote RAS feature uses the Pro-Server EX (optional) or the Pro-face’s Pro-Server with Pro-Studio

(optional) installed in the host PC to monitor and control the System Monitor/RAS feature of the PL.

The Pro-Server EX Ver. 1.20 or higher or the Pro-Server with Pro-Studio Ver.3.12 or higher is required to use

the Remote RAS feature. When using this feature, refer to the installation guides provided with the Pro-Server

as well as this manual.

7.4.1

System Configuration

The system employing this feature is configured as illustrated below.

Server PC

Client PL

Ethernet

o-wa

y feature

Pro-Server EX Ver. 1.20 or higher
Pro-Server with Pro-Studio Ver.3.12 or higher
Remote RAS Server Program (IPC_RAS.npj)

User Application

[System Monitor/RAS Feature]

•

SystemMonitor.exe

•

System Monitor Property

•

Ioctl.dll

•

Smonras.dll

•

Blioctl.dll

•

Sysmon.sys

Summary of Contents for PL-6930-T41
















































































































































































Search results

Summary of Contents for PL-6930-T41

Reviews:

Related manuals for PL-6930-T41

Brands by name

Popular brands

Pro-face PL-6930-T41, User Manual

Search results

Summary of Contents for PL-6930-T41

Reviews:

Related manuals for PL-6930-T41

Brands by name

Popular brands