Chapter 2 Specifications
2-7
Display
Touch Panel
*1
For the setting of Master/Slave, refer to the following section; Chapter 3 Uninstalling / In-
stalling HDD units / CF card units (page3-6)
*2
When using the HDD SLOT1 (Expansion SLOT1) with the CD-ROM drive unit at the same
time, be sure to set the HDD/CF card unit inside the Expansion SLOT1 as Master.
*3
The clock, RTC, built in the PL has fudge error. The range of the error will be b300
to -300 sec. / month, depending on the PL’s conditions such as lifetime usage or temperature
difference. If you use the PL in a computer network that takes this error seriously, adjust the
clock in regular intervals.
Item
Specification
Type
12 inch SVGA TFT color LCD
Resolution
W800 x H600 dots (SVGA)
Dot pitch
W0.3mm [0.01in.] x H0.3mm [0.01in.]
Effective Display Area
W246.0mm [9.69in.] x H184.5mm [7.26in.]
Color/Shade level
260,000 colors
Backlight
CFL (Compact Fluorescent Lamp) 2-color-light system
Brightness control
4 levels of adjustment (Controlled by software)
Contrast Adjustment
None
View Angles
Horizontal Direction: 120 degrees, Vertical Direction: 100 degrees
(Contrast ratio: CR is 10 or greater, or TYP value)
Display Service Life
50,000hrs.(MTTF) (Backlight display service life is not included.)
Backlight Service Life
50,000hrs. or more (at ambient temperature 25
°
C and continuous
operation - a period until backlight brightness decreases to 50% or
backlight starts to flicker)
Item
Specification
Type
Resistive Film (analog)
Resolution
1024 x 1024
Service Life
1,000,000 times or more
Interface
USB or COM4
