PL-6930 / PL-7930 Series User Manual
1-6
1.2
System Design
The following diagram illustrates the standard range of items that can be connected to the unit.
*1
The Pro-face’s optional devices used with PL.
*2
When using the HDD unit with the CD-ROM drive unit at the same time, be sure to set the HDD unit’s
setting as Master. [Chapter 3 Uninstalling / Installing HDD units / CF card units (page3-6).]
*3
The CARD BUS doesn’t include functions of ZOOMED VIDEO, SOUND.
•
This diagram shows only the PL's internal layout and connectable devices. The user's actual
design may differ.
RAS I/F
(D-sub 25pin)
(4SLOT type :3 PORT,2SLOT type :1 PORT)
PCI/ISA SLOT
RS-232C/RS-485 Converting Unit *1
(Available only for COM2 / COM3)
ISA board (commercial type)
PCI board (commercial type)
DIM Module *1
Hub
(commercial type)
Graphic Operation Panel for GP series
(Commercial or Conventional products)
(4SLOT type :3 PORT,2SLOT type :1 PORT)
MEMORY SLOTx1
200pin SODIMM
RAS Cable
(Produces by users)
RS232C I/F COM1.2.3.4
(D-sub 9pin)
USB I/F x 1
USB 2.0 or 1.1 Compatible Peripherals (commercial type)
USB 2.0 or 1.1 Compatible Peripherals
USB Keyboard on the narkef
Sound Devices such as Speaker
Pin- jack Cable
(commercial type)
IDE I/F
Secondary
LAN I/F x 2
(100/10BASE-T)
Primary (HDD0)
Secondary (HDD1)
PCMCIA
/CARD BUS *3 x 1
HDD/CF Card
Unit I/F x 2
USB I/F x 2
SOUND
(LINE IN.MIC.SPK)
HDD Unit or CF Card Unit *1 *2
Serial Cable
(commercial type)
CD-ROM Drive Unit *1
Twisted Pair Cable
(commercial type)
Commercial Item
Major
Network
Peripherals
(commercial type)
Back of PL
unit
Side of PL
unit
Front of PL
unit
HDD Unit *1
