Prinzen PSPC5, Service Manual, Page: 28 / 73

INSTALLATION
Page 28 of 73 SERVICE MANUAL PSPC5 SM-PSPC5-01-E/12-2007
DIRECTION OF ROTATION
OUTPUT CONVEYOR
23. Press the stop button.
24. Make sure the “Machine stopped by stop
button” text is visible on the screen.
ATTENTION!
Make sure the text on the screen is still
“Machine stopped by stop button”. Check the
rotation direction of the outfeed conveyor
immediately after pressing the start button of
F3 and Q3. When the rotation direction of the
outfeed belt is not from the denester towards
the vacuum head, stop the belt immediately by
pressing the red stop button of F3 or releasing
the start button of Q3. Disregarding this
warning will damage the clutch of the denester.
25. Remove the warning label from the start
button of motor protection switch F3
26. Press the black start button of F3 and
immediately check if the output conveyor is
running. When this is the case immediately
press the red stop button of F3.
27. Activate the blue switch from 0 to 1 of
contactor Q3 shortly to check the rotation
direction of the output conveyor. Release
the blue switch immediately. Make sure
that the output conveyor is running from
the denester towards the vacuum head.
28. When the rotation direction of the output
conveyor is wrong contact the service
department of Prinzen.
TESTING
29. Push the emergency button. Make sure
the systems stops immediately.
30. Make sure the “Emergency stop! Unlock
button and press start” text is visible on the
screen.
Machine stopped
by stopbutton F6
25
26
27
29
23
24
Emergency Stop !
Unlock button and p
30