Prinzen PSPC5, Service Manual, Page: 10 / 73

INTRODUCTION
Page 10 of 73 SERVICE MANUAL PSPC5 SM-PSPC5-01-E/12-2007
GENERAL
This manual contains important information concerning:
- Safety
-
Installation
-
Adjustments
Read and understand this total service manual before starting to adjust the system. Beside this
manual also knowledge about the operating, maintaining and cleaning of the system is necessary for a
safe and correct adjustment of the system. Also read and understand the complete user manual of the
system before starting to adjust it.
Never change the sequence of procedures as described in this manual.
SAFETY REGULATIONS
Before starting to adjust the system first read this chapter and chapter
Safety .
LEGAL REGULATIONS
All safety directions stated in this manual must be observed.
Along with the safety regulations in this chapter the instructions of the qualified trade organization of
your country must be observed to avoid accidents.
Before starting to adjust the machine always consult the safety manager of the company to discuss if
a work permit is required for this job.
All safety devices, installed in the machine by the manufacturer and the indications mentioned in the
manuals are conditions to control the machine safely.
Technical changes, which influence the safety working of the machine, may only be executed by the
service department of Prinzen.
Do not change controls, and/or PLC programs, without written permission from Prinzen because this
may affect the safety of the machine.
Only use genuine Prinzen parts or CE-certified parts for replacement.
Prinzen cannot be held responsible for any consequential damages to the system or other installations
that were caused by technical changes, unprofessional maintenance and repairs on our system, which
were executed by the dealer.
Warranty becomes invalid when consequential damages to the system, caused by technical changes,
unprofessional maintenance and repairs, were executed by the dealer.
HOW TO USE THIS MANUAL?
The manual is constructed to provide a maximum amount of information with a minimum amount of
searching. The key to easy reference is the Table of contents. Familiarize yourself with it and you
won’t have any trouble locating information from any area of machine.