Install PrimexEVENT Bell Controller Device
A Bell Controller device can be installed either by a surface- or wall-mount method. Both techniques
can be used together if desired.
The Bell Controller device has two independent relays that are connected to your existing PA or bell
system. Each relay is assigned to a zone and the zone schedules are downloaded and stored in the
bell controller device. A relay triggers the bells to ring at the schedules set in its assigned zone.
In addition, the Bell Controller dry contact closure inputs can be connected to a standalone switch or
button to activate a bell manually - commonly referred to as an impromptu bell. An impromptu bell
is a bell event that is not scheduled in OneVue.
Note:
The device is required to be configured with your OneVue account ID and network settings.
Verify the device can successfully check-in to your OneVue account at its installation location.
For more information, see "Check-In to OneVue" on page 12.
