Check-In to OneVue
A PrimexEVENT Bell Controller checks-in to your OneVue account hourly. During each check-in, any pending schedule or setting updates
are downloaded to the device, its current operating status and event history are sent to your OneVue account, and its time is
synchronized with its NTP time source. You can optionally press the check-in button to initiate a manual check-in.
When the check-in button
is pressed, a manual check-in is initiated
The device emits a series of audio beeps indicating its connection sequence.
1 beep: device gateway has booted
2 beeps: device gateway has connected to network
3 beeps: device gateway has connected to OneVue account
During an active check-in connection, additional pressing of the check-in button is ignored.
12
PrimexEVENT Series - Bell Controller Installation Guide