Notices for Safety
Install at the strong bottom and the horizontal place.
ⶺ
If the product is built on a slant, it can be slipped and destroyed. So it can cause a strange vibration, a noise and a breakdown.
Install at intervals with the walls and use at the few dusty place.
ⶺ
Keep at regular intervals with the walls for the smooth function of protection against heat of the product. If the product is overheated, it can cause the
damaged product and a fire.
ⶺ
Only if the product is used in the dusty place, the dust flowing into the equipment can cause the breakdown of the equipment.
When the product is built, install it in the place where the electric cord is unplugged easily.
ⶺ
Because of the electric shock by the current leakage and the cause of a fire, install the electric outlet at the close place where the electric power source
can be dismantled in the moment of danger.
In case that the product is not used for a long time and a thunder or lightning strikes, unplug the electric power source.
ⶺ
Please be advised to disconnect the electric power source unless the product is used because a stroke of lightning can cause the electric shock & a fire.
Don't put the objects(other instruments or tools) on the product.
ⶺ
It can cause an electric shock, a fire, a breakdown and an injury.
When the operation is set, set it up exactly to be suited for the specification of a battery.
ⶺ
Only if the specification of a battery and the set-up are different, the life-shortening and damage of a battery can be caused.
Don't put the metallic tool on the battery and never drop it down.
ⶺ
If the metallic tool touches the terminal of a battery, the spark will happen and the battery will short-circuit, and the explosion can be caused. Please take notice.
Please surely get rid of the metallic necklace and chain, a bracelet, other accessories on the body in case of the operation of regeneration
and charge.
ⶺ
When the short-circuit of a battery happens, the electric shock and the injury can be caused with the big current flowing into the body.
The interval between the product and the battery should be kept more than 1m at least, specially install the air-intake direction of the
equipment reversely against the battery.
ⶺ
If the sulfurous acid gas of a battery flows into the inside of the product, the internal circuit board is corroded. So the product breakdown can be caused.
At the moment of the regeneration and charge of a battery, operate it at the place where there are flammable things and where is well
ventilated.
ⶺ
At the moment of the regeneration of a battery, as the sulfurous acid gas happens, the body can be injurious being exposed to it for a long time.
Please be advised to operate it at the place where is well ventilated.
Please check the external state of the battery surely before the regeneration or charge of it.
ⶺ
Please don't connect the +, - terminal of the damaged battery with the equipment at all, in case that the battery case is cracked and the corner of it is broken,
and only if the electrolyte of the internal battery is leaked.
1. Connect the red tongs with the anode and the black tongs with the cathode.
2. Only if the positive and negative is connected reversely and START is carried out,
"Check Connection" message is indicated on the LCD display with a warning sound,
then the equipment is not operated.
* If the any positive and negative terminal is not connected exactly and tightly,
the short-circuit can happen. Please take notice.
Red tongs
Black tongs
Connection of PRIME Regenerator and Battery
Only if the user does not keep, the user may be injured or
the property may be damaged.
Caution
