Precor P10 Operating And Maintaining Download

Page: 20 / 144

Operating and Maintaining the P10 Console

Number Name Details

Workouts

Examples of workouts:

•

Manual

•

Heart Rate

•

Interval

•

Weight Loss

•

Variety

•

Performance

Pause

Use to pause or end a workout
session.

OK and Up/Down
arrows

Use to navigate options and settings.

Quick Start

Press

Quick Start

to begin exercising.

•

Calories

•

Time Elapsed

•

Time
Remaining

•

Watts (bike)

•

Time (bike)

Use the

▲

▼

arrows to change

what information is displayed.

Incline or
Crossramp

Available on treadmill and EFX (dual).

Speed or
Resistance

Available on AMT, bike, treadmill,
EFX (single), and EFX (dual).

•

Average
Speed
(treadmill)

•

Speed (bike)

•

Pace
(treadmill)

•

Distance (all
equipment)

•

RPM (bike)

•

Cals/Min
(AMT)

•

Strides/Min
(AMT, EFX)

•

Total Strides
(EFX)

Use the

▲

▼

arrows to change

what information is displayed.

Summary of Contents for P10

















































































































































Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands

Precor P10, Operating And Maintaining

Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands