Maintenance
53
To review and reset the status of the treadmill:
1.
At the Welcome banner, press the
Pause
key, then enter
the following digits on the keypad:
5 1 7 6 5 7 6 1
2.
Use the up and down arrow keys to scroll through the
menu names until
HARDWARE VALIDATION
appears.
3.
In the Hardware Validation menu, use the up and down
arrow keys to scroll through the menu options until
ACTIVE STATUS LIGHT
appears, then press
OK
again.
4.
Press and hold the
Quick Start
key until the status light
returns to a steady blue color.
5.
Press the
Pause
key to return to the Welcome banner.
Note:
If the status light is steady yellow, you can also clear it
by reviewing and clearing the entries in the event log (refer to
Viewing the Informational Displays
).
To adjust the brightness of the status light:
1.
At the Welcome banner, press the
Pause
key, then enter
the following digits on the keypad:
5 1 7 6 5 7 6 1
2.
Use the up and down arrow keys to scroll through the
menu names until
HARDWARE VALIDATION
appears.
3.
In the Hardware Validation menu, use the up and down
arrow keys to scroll through the menu options until
AS
LIGHT BRIGHTNESS
appears, then press
OK
again.
4.
Scroll through the available settings (
LOW
,
MED
, and
HIGH
) to select the brightness level you want, then press
OK
.
Summary of Contents for P10
