Precor P10 Operating And Maintaining Download Page 56

Page: 56 / 144

Operating and Maintaining the P10 Console

Changing the Belt (AMT Only)

The AMT uses belts to provide motion. These belts eventually
wear and must be replaced.

When the belt stride count reaches 90 million, the message

BELTS MUST BE CHANGED SOON

scrolls on the Welcome

screen. While this message appears, the AMT operates
normally.

Important:

If this message displays on your AMT, please contact

Precor Customer Support for assistance.

When the belt stride count reaches 100 million (and the belt
has not been changed), the message

BELTS CHANGE

REQUIRED

scrolls continuously on the Welcome screen. The

input keys are not functional and the user cannot enter values
or begin a workout until the belts are changed. Please contact
Precor Customer Support to schedule a belt change.

Summary of Contents for P10

















































































































































Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands

Precor P10, Operating And Maintaining

Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands