Precor P10, Operating And Maintaining

Page: 82 / 144

20
Assembling and Maintaining TRM 800-Series Treadmills
Before you begin, verify that you have received the following
parts:

Base frame assembly

Left and right upright supports

Center fairing with handrails

Hardware kit

Console

Personal Viewing System (PVS), if one was part of the
order
Installation Requirements
The location where the treadmill is installed must provide
power connections that supply the appropriate voltage, a 20A
individual branch circuit, and grounding per NEC (National
Electric Code) guidelines or local region electric code.
CAUTION: Do not use a non-grounded outlet or transformer. Do
not remove or otherwise bypass the plug with an adapter.
Electrical damage can occur and void the Precor Limited Warranty
if the treadmill is connected to an improper power source.
Required Tools
 ⁵₃₂
-inch hex wrench (ball end hex wrenches are desirable)

³₁₆
-inch hex wrench

⁷₃₂
-inch hex wrench

³₄
-inch open-end wrench
 ⁷₁₆
-inch, 30 inch-pound (in-lb) torque wrench (if you are
installing a coaxial television cable)

Bubble level

#3 Phillips screwdriver

String or fish tape

Wire cutter